Unitron Element Uživatelský manuál stáhnout pdf (Strana 8)

Quick Tuning Screen

The Quick Tuning screen is designed

to address the first sound impression during

a fitting. The hearing aid’s global parameters,

occlusion manager and adaptation manager,

as well as overall gain adjustments for

individual programs can be accessed from

this screen.

Note: Within the Quick Tuning screen, both

ears are linked. To unlink the two ears, click

the Link/Unlink button.

Linked:

Unlinked:

The active program is highlighted in orange.

In this case, All Programs is selected so any

changes will affect all programs

simultaneously. You may also select

individual destinations within autoPro2™ or

within the individual manual programs for

adjustment.

To adjust Overall Gain:

Use the + and – buttons to increase or decrease the overall gain of the hearing instruments.

The gain can be adjusted for each ear individually or both ears simultaneously:

Note: The Ear Link function does not apply when using the overall gain buttons.

To adjust the Global Parameters:

Adaptation Manager adjusts the initial fitting according to the client’s experience level with

hearing aids. Target (Experienced Setting), Target -4 dB, Target -7 dB and Target -10 dB

(New Wearer).

For slim tube and CRT open and closed dome fittings, the adaptation manager settings are

described in percentages: 100% (Experienced), 80%, 65% and 50% (New Wearer).

Occlusion Manager: used to make adjustments for the subjective sound quality of the

client’s own voice. There are four settings: Off, Mild, Moderate and Maximum. The default

setting is Off.

Note: Changes made to the adaptation manager or the occlusion manager will affect all

autoPro2 destinations and manual programs. Adjustments made to these controls will

automatically adjust the current settings of the hearing aids. It is not necessary to re-quick

fit the hearing aid.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Žádné komentáře

Unitron Element Uživatelský manuál Strana 8